|
|
||||||||
|
||||||||
|
||||||||
|
||||||||
|
||||||||
|
||||||||
|
||||||||
|
||||||||
|
||||||||
| *Longer
lengths available with "Pieced" sections.
|
||||||||
 |
A | 1 1/2" O.D. Graphite Push Pole (up to 19')* | ||||||
| B | 1 1/2" O.D. Fiber Glass Pole (up to 19')* | |||||||
| C | Solid machined aluminum point (standard) | PPA | ||||||
| D | Solid machined Delrin point (optional) | DPT | ||||||
| E | Solid PVC delta foot (for softer bottoms) |
PVF | ||||||
| F | Solid machined aluminum foot (standard) | PAF | ||||||
| G | Pop Up Holders (flush mount) | PUH | ||||||
| H | ABS plastic pole holders (B or W) set of 3 |
PPH (B or W) | ||||||
| I | ABS jon boat holders (B or W) set of 3 |
JBH (B or W) | ||||||
|
|
||||||||
The Third Hand is a push pole
holder that mounts on the top of your poling platform. When you're poling from your
platform, and need to put the pole down quickly to make a cast, or to help a friend land a
fish; you simply "snap" the pole in your  Third Hand. You don't have to put the push pole in
the boat. Leave one end of the pole dragging in the water. The Third
Hand will adjust to the movement and direction of your boat. Your pole will
be held firmly in place until you are ready to resume poling. The Third Hand is made of rugged, space age, white Delrin plastic, with stainless steel hardware. Third Hand rotates 360 degrees, and pivots both up and down. Moving parts are adjustable for tighter or looser movement. Push poles are held in place by a heavy duty PVC gripper that is available for all diameter push poles. THIRD HAND THH |
||||||||
|
|
||||||||
 Stake
out poles and stake out lines are used to "anchor" the
boat. This quicker and quieter method of anchoring takes the place of a traditional
anchor.
Stake out poles are made from the same material as push poles. They have an aluminum point and stainless steel tie off ring. Stake out lines are nylon rope in 8' lengths. Both ends have stainless steel snaps. STAKE OUT
POLES SOP |
||||||||
|
|
||||||||
The POLEHOLDSTER
is a push pole holder that attaches to your belt. When poling from your platform,
and you need the use of both hands, you simply "snap" your push pole into your POLEHOLDSTER
on your belt. You don't have to put the push pole in the
boat. Leave one end of the pole dragging in the water.  The POLEHOLDSTER
temporarily holds your pole and allows you to make a quick cast, or provides a rest break,
or allows use of both hands for some other use. The POLEHOLDSTER
is made of rugged, space age, ABS plastic, with stainless steel hardware. The POLEHOLDSTER
will pivot up and down slightly for a comfortable temporary hold. The POLEHOLDSTER
will hold all diameter push poles.POLEHOLDSTER PHS |
||||||||
Toe Rail Kits KEEPS FLY LINE ON DECK KEEPS TACKLE ON DECK KEEPS ANGLERS ON DECK
|
||||||||
|
||||||||
An
easy to install permanent base plate attaches to your boat deck or
gunnel. You drill only three small holes to attach the plate (SS hardware
provided) The pole holder section screws into the center hole of the
base plate. This pole holder section can be removed when not being
used to lock 
down
pole. It cannot be removed when the pole is in the lock down position.
The
Po-Lock holder is made of marine brass/bronze, chrome plated and polished.
It is made to fit on deck or gunnel of most boats "in line" with the
normal mounting position of your push pole. It comes with complete
stainless steel hardware, lock, and instructions. Extra locks are
available. 
